Adding a Speaker

Up to 128 speakers can be added to the one S1000 Controller. Although, a maximum of 998 can be configured in Sonitrol CORE.

1. From the left navigation pane, click Hardware.

2. From the top navigation bar, click Profiles.

3. In the Hardware Profiles page, find and select the site profile to which you wish to add a device.

4. Click Edit on the profile tile. You can also click and select Edit from the list.

5. In the Edit Profile page, click the Configurations tab.

6. Go to the Speaker section, then click New Speaker.

7. On the Add New Speaker page, complete the details.

   Field	Description
   Name	Enter a unique and meaningful name. The name should contain only alphanumeric characters and no spaces. Up to 255 characters can be used.
   Description	Enter more information about the device.
   General
   Logical ID	Enter a unique identifier for the device connected to the S1000 Controller. Allowed range is 0-254.
   Device	Click + to find and select the specific audio board where the speaker is connected.
   Physical ID on Device	Enter the unique identifier configured into the device.
   Area	Click + to find and select the area where the device is located.
   Default Volume	Enter the default volume of the speaker.
   Reporting
   Report Events	Turn on the toggle to record events.
   Report To	Select the connection paths where the recorded events will be reported. Select the checkbox next to the option on the drop-down list or select the Select All checkbox.
   High Priority	Turn on the toggle to assign high priority to this device.

8. Click Create.