PowerG Devices Enrollment Methods

PowerG devices supports several enrollment methods depending on the model and design of the device. The following table provides the enrollment method for each supported PowerG device and describes how to troubleshoot failed enrollment.

Device Part Number	Device Description	Enrollment Method	If enrollment fails...
PG9303	Small Door/Window contact Contact	Battery pull tab	Remove and re-insert batteries
PG9945	Door/Window Contact with Auxiliary Input	Hold Enroll button for 3 seconds or until LED flashes orange	Repeat enroll button process
PG9938	Single button with panic	Hold Enroll button for 3 seconds or until LED flashes orange	Repeat press and hold process
PG9949	Two-button fob with panic	Press and hold Unlock button until LED is steady	Repeat press and hold process
PG9914	Wireless PIR motion detector with pet immunity	Hold Enroll button for 3 seconds or until LED flashes orange	Repeat enroll button process
PG9872	Long range 360° Ceiling-mount PIR detector	Insert battery	Remove and re-insert batteries
PG9862	360° PIR detector	Insert battery	Remove and re-insert batteries
PG9922	Two-way glass break detector	Hold Enroll button for 3 seconds or until LED flashes orange	Repeat enroll button process

See Also

Wiring

Adding a PowerG Host to the S1000

Adding a PowerG Host in Sonitrol CORE Adding a PowerG Wireless Device in Sonitrol CORE

Enrolling PowerG Devices

Documentation Reference SONCORE_12_2-UG-EN-1_0 created February 2026 applies to SONITROL CORE v12.2