Specifications
|
Physical |
|
|
Dimensions |
165mm (w) x 100mm (h) x 40mm (d) (6.3" x 3.9" x 1.6") |
|
Packed weight |
150g (5.3oz) |
|
Environmental |
|
|
Operating temperature |
-10°C (14°F) to 55°C (131°F) UL/ULC*: -10°C (14°F) to 49°C (120.2°F) |
|
Operating humidity |
95% ± 5% relative humidity (non-condensing) at 30°C (86°F) UL/ULC*: 5% (0°C or 32°F) to 93% (32°C or 90°F) |
|
Electrical |
|
|
Power input |
10V to 60V (UL 2610, UL 294: 15VDC to 30VDC) |
|
Power consumption |
Typically 120mA at 12VDC UL/ULC*: 1.42A at 12VDC input with full load, 1.14A at 30VDC input with full load |
|
Power protection |
Resettable fuse 3.0A |
|
Power supply |
|
|
AC input range |
106VAC to 240VAC, 50Hz/60Hz, 1.5A maximum |
|
Auxiliary output supply |
0.5A at 10VDC to 16VDC |
|
Communications |
|
|
Processor |
ARM 7 32-bit at 200MHz |
|
Memory |
1MB SRAM 2MB program flash 8MB data flash 512K EEPROM |
|
Dual flash memory |
Two versions of the firmware can be stored and remotely upgraded |
|
Communication |
Multi-drop OSDP port isolated for connection to the main S1000 Controller |
|
Onboard I/O |
|
|
Inputs |
8 multi EOL monitored inputs or analog inputs 0V to 10V Default 10K, programmable from 1K to 50K |
|
Outputs |
2 relay NO/NC dry contact 0.5A at 120VAC |
|
Alarms |
|
|
Inputs |
Maximum 32 |
|
Outputs |
Maximum 23 |
|
Readers |
Maximum 8 |
|
OSDP devices |
Maximum 8 |
|
Tamper input |
Top and bottom |
|
Miscellaneous |
|
|
DIP switch |
Switch 1 to Switch 4: Set the OSDP address on the bus |
|
Status indicators |
Relay outputs Ethernet (speed and link status) RS485 (TX, RX) RS232 (TX, RX) DC power Battery System status |
|
Supported |
|
|
Expansion cards |
8 Input 2 Output Expansion Card (SE1-8I2O-PCB) 6 Out Expansion Card (SE1-6OUT-PCB) Card Reader Interface Expansion Card (SE1-CRI-PCB) |
*UL/ULC = UL: UL 294, UL 2610 / ULC: CAN/ULC 60839-11-1, ULC S304, ULC/ORD C1076