Specifications

165mm(w) x 100mm(h) x 40mm(d) (6.5" x 3.9" x 1.6")

150g (5.3oz)

-10°C (14°F) to 55°C (131°F)

UL/ULC*: -10°C (14°F) to 49°C (120.2°F)

95% ± 5% relative humidity (non-condensing) at 30°C (86°F)

UL/ULC*: 5% (0°C or 32°F) to 93% (32°C or 90°F)

Typically 120mA at 12VDC

UL/ULC*: 1.46A at 12VDC input with full load; 1.22A at 30VDC input with full load

10VDC to 60VDC

UL/ULC*: 15VDC to 30VDC

Resettable fuse 3.0A

106V to 240VAC

50Hz/60Hz

1.5A maximum

Up to 1A
Supports SLA or Li-ion batteries
Li-ion batteries are not evaluated for UL/ULC*. On-board battery charger is not evaluated for CAN/ULC 60839-11-1.

0.5A at 10VDC to 16VDC

CAN/ULC-S304: Total available output current shall be limited to 380mA. See S1000 Installation Guide for additional requirements.

Battery voltage, current and temperature (UL/ULC*: NA)

Allows two versions of the firmware to be stored.

Enables remote upgrades without any down time.

1MB

2MB

4MB

512K

ARM 7 32-bit at 200MHz

8 multi end-of-line monitored inputs
or
Analog 0V to 10V inputs (UL/ULC*: NA)

The default is 10K, but programmable from 1K to 50K (UL/ULC*: 10K).

2 relay NO/NC dry contact 0.5A at 120VAC (UL/ULC*: NA) / 1A at 24VDC

3 O/C 0V to 24V at 250mA

2 Wiegand D0/D1 (door contact, egress, door strike, green/red LED control, buzzer)

CAN/ULC 60839-11-1: Wiegand Port has been tested for compatibility with UL listed readers for 26-bit Standard format.

1000 by default; 200000 with an SD card

1000 by default; 65000 with an SD card

100 dates; 5 holiday types

200 maximum

150 maximum

254 maximum

192 maximum

32 maximum

16 maximum

32 maximum; 150 maximum with an SD card

1 top and 1 bottom

128-bit cards maximum

64 maximum

64 maximum

Relay outputs
Ethernet: speed and link status
RS485 (TX, RX)
RS232 (TX, RX)
DC power
Battery
System status

RJ45 Ethernet port 10/100 BaseT

RS485 multi-drop OSDP port RS232/RS485 configurable port

BLE 4.2

1000 maximum

• ENCL-L-STD | 1010-01PD

• ENCL-S-STD

• PDENCL-10

• MENC

TLS v1.2/1.3 256-bit by default to Sonitrol CORE

Micro SD slot to increase the number of users and transactions. Up to 32GB.

An SD card (up to 32GB) is required to support the Audio 8 Board.

Recommended industrial grade SD cards are:

• Western Digital (SanDisk) SDSDQAF3-032G-I (-20°C to +85°C)

• Western Digital (SanDisk) SDSDQAF3-032G-XI (-40°C to +85°C)

Note: Western Digital SanDisk SDSDQAF3-016G-I (16 GB) is no longer recommended.

3 - suitable for any S1000 compatible expansion module

4 maximum